Basement Bathroom Fans

Basement Bathroom Fans

Basement Bathroom Fans - Price Comparison Advisor

Basement Bathroom Fans

Getting Rid of Stale, Moist Air is a Must In Basement Bathrooms

A bathroom in a finished basement can greatly increase home value, but many people fail to consider ventilation until after the renovation is completed. A bathroom exhaust fan is especially important in a basement bathroom, as moisture and stale air can be more problematic than in above-ground bathrooms. This buying guide from Home Improvement Educator provides all the information you need to know about bathroom fan installations, including how much the project costs.

Why Should I Install a Bathroom Fan in the Basement?

Basements are moisture-prone to start with. Adding a bathroom – especially one with a shower and/or tub – can greatly exacerbate this problem. Removing bathroom moisture, then, before it damages paint and sheetrock and/or swells any wood in the basement, is imperative. Some other reasons to install a fan include:

  • If left unchecked, excess moisture can lead to the growth of mold and mildew.
  • An exhaust fan gets rid of unpleasant smells.
  • A bathroom fan can not only exhaust air to the outdoors, but can also draw in fresh outside air.

Get Free Price Quotes

Basement Bathroom Fan Considerations

  • It can be difficult to exhaust a bathroom fan in a basement due to limited ceiling space. For a truly finished basement, the ductwork needs to be above the finish ceiling. Fortunately, most bathroom fans are available with side-mounted ductwork (as opposed to top-mounted ductwork, which increases the amount of space needed). They can also be fitted with aftermarket ductwork designed to be installed in tight quarters.
  • The fan must be exhausted directly to the outside, which means either going straight up the entire house and out through the roof (not recommended due to extensive labor costs) or directly outside through the basement ceiling. Expect to hire a concrete coring company if going directly outside necessitates cutting through concrete.
  • A qualified electrician must be hired to correctly wire and connect a bathroom fan to a home’s electrical system. Many contractors say they can handle this job without the expense of an electrician. For insurance reasons, however, this job should always be handled by a licensed and qualified electrical contractor.

Basement Bathroom Fan Costs

The following prices are based on national averages; actual costs may be higher or lower depending on the area of the country you live in.

  • Installing a bathroom fan (including electrical work, materials, exterior exhausting, and ductwork labor) costs $300 to $600 based on the difficulty of the installation as well as the distance between the fan and the exterior wall.
  • The fan must be exhausted directly to the outside, which means either going straight up the entire house and out through the roof (not recommended due to extensive labor costs) or directly outside through the basement ceiling. Expect to hire a concrete coring company if going directly outside necessitates cutting through concrete.
  • Hiring a concrete cutting company can add $100-$200 to the total project cost depending on the thickness of the foundation walls.
Share
Basement Bathroom Fans - Price Comparison Advisor

Basement Bathroom Fans

Why Should I Install a Bathroom Fan in the Basement?

Basements are moisture-prone to start with. Adding a bathroom – especially one with a shower and/or tub – can greatly exacerbate this problem. Removing bathroom moisture, then, before it damages paint and sheetrock and/or swells any wood in the basement, is imperative. Some other reasons to install a fan include:

  • If left unchecked, excess moisture can lead to the growth of mold and mildew.
  • An exhaust fan gets rid of unpleasant smells.
  • A bathroom fan can not only exhaust air to the outdoors, but can also draw in fresh outside air.

Get Free Price Quotes

Basement Bathroom Fan Considerations

  • It can be difficult to exhaust a bathroom fan in a basement due to limited ceiling space. For a truly finished basement, the ductwork needs to be above the finish ceiling. Fortunately, most bathroom fans are available with side-mounted ductwork (as opposed to top-mounted ductwork, which increases the amount of space needed). They can also be fitted with aftermarket ductwork designed to be installed in tight quarters.
  • The fan must be exhausted directly to the outside, which means either going straight up the entire house and out through the roof (not recommended due to extensive labor costs) or directly outside through the basement ceiling. Expect to hire a concrete coring company if going directly outside necessitates cutting through concrete.
  • A qualified electrician must be hired to correctly wire and connect a bathroom fan to a home’s electrical system. Many contractors say they can handle this job without the expense of an electrician. For insurance reasons, however, this job should always be handled by a licensed and qualified electrical contractor.

Basement Bathroom Fan Costs

The following prices are based on national averages; actual costs may be higher or lower depending on the area of the country you live in.

  • Installing a bathroom fan (including electrical work, materials, exterior exhausting, and ductwork labor) costs $300 to $600 based on the difficulty of the installation as well as the distance between the fan and the exterior wall.
  • The fan must be exhausted directly to the outside, which means either going straight up the entire house and out through the roof (not recommended due to extensive labor costs) or directly outside through the basement ceiling. Expect to hire a concrete coring company if going directly outside necessitates cutting through concrete.
  • Hiring a concrete cutting company can add $100-$200 to the total project cost depending on the thickness of the foundation walls.
Share

Leave a Comment

Your email address will not be published.